Commercial & Industrial Rooftop Solar Solutions
High-capacity rooftop solar installations for factories, corporate offices, warehouses, educational institutions, and hospitals with accelerated depreciation tax benefits.
Ideal for: Manufacturing Plants, Warehouses, Cold Storages, Hospitals, Schools & Hotels
Transform Unused Factory Roofs into Green Powerhouses
Industrial and commercial establishments operate peak loads during daytime hours — precisely when solar generation is at its maximum. By installing an on-site rooftop solar plant, industries generate clean electricity right where it is consumed, avoiding transmission losses and peak demand charges.
Eligible for 40% Accelerated Depreciation (Section 32 of Income Tax Act)
Rapid return on investment with typical financial payback within 30 to 42 months.
Non-penetrative sheet clamps guarantee zero roof leakage on pre-engineered building (PEB) sheds.
Full support for Open Access and Net Metering compliance under State Electricity Regulatory Commissions.
Strengthens ESG compliance and enables carbon offset reporting for supply chain tenders.
Custom engineering by Raysteeds with structural stability certification and STAAD-Pro wind analysis.
Technical Specifications
Standard technical architecture and bill of materials configured for Rooftop Solar for Commercial & Industrial.
25 kW, 50 kW, 100 kW, 250 kW, 500 kW to 2 MW+
Tier-1 550Wp+ Bi-facial Glass-to-Glass / Mono PERC Modules
Three-Phase String Inverters (50kW / 100kW / 125kW) with IP66 Rating
PEB Trapezoidal Metal Sheet, Standing Seam, Kalzip, and Flat RCC
Aluminium Anodized Short-Rail / Long-Rail with EPDM seals & SS304 Fasteners
Integrated LT panel sync or HT Step-Up transformer (11kV / 33kV)
Industrial SCADA / RS-485 Modbus / IoT Gateway with Weather Station
IEC 61215, IEC 61730, MNRE, CEA safety regulations & Factory Inspectorate approval
MNRE & IEC Compliant Bill of Materials
All components are sourced from ALMM-listed Tier-1 manufacturers with traceable serial certifications.
How the System Works
Seamless operation from solar photons to grid synchronization and load consumption for Rooftop Solar for Commercial & Industrial.
Engineering Audit & 3D Modeling
Raysteeds engineers perform a structural load audit of your roof, electrical single line diagram (SLD) mapping, and shadow simulations.
Turnkey Procurement & Installation
High-grade Tier-1 modules, string inverters, and non-penetrative mounting hardware are assembled by certified solar technicians.
LT/HT Grid Synchronization
The plant is seamlessly integrated into your Main LT Distribution Panel or stepping up to HT lines with reverse power protection relays.
Commissioning & SCADA Handover
Comprehensive testing, CEIG electrical inspection approval, net metering commissioning, and live SCADA portal activation.
Key System Components
Only Tier-1, ALMM-listed, certified components engineered for 25+ years of continuous service.
Bi-facial High-Efficiency Modules
Front and rear power generation yielding up to 10-20% additional solar gain from roof albedo reflection.
Commercial Three-Phase Inverters
High-capacity commercial inverters with 9-12 MPPT channels for maximum string-level energy harvesting.
Engineered PEB Mounting Hardware
Aluminium extruded rails with heavy-duty EPDM gaskets and SS304 rivets ensuring 100% waterproof seal integrity.
LT Synchronization Panel
Custom AC distribution board with motorized MCCBs, energy meters, digital multifunction relays, and class-1 surge arresters.
Plant SCADA & Weather Sensor
On-site pyranometer, ambient temperature, module surface sensor, and wind anemometer for real-time PR ratio calculation.
Reverse Power Protection Relay
Smart zero-export control relay ensuring compliance for installations where net metering export is capped.
Why Choose Rooftop Solar for Commercial & Industrial
Proven returns, financial security, and end-to-end EPC execution backing your investment.
Reduces commercial electricity unit cost from ₹10+/unit to a levelized cost of under ₹2.50/unit.
Accelerated Depreciation allows 40% write-off of asset value in year one for substantial corporate tax savings.
Protects enterprise from periodic tariff revisions and peak surcharge penalties.
Enhances brand equity and fulfills green supply chain audit benchmarks for international export clients.
Low maintenance with automated sprinkler washing systems available as optional add-on.
Backed by Raysteeds Energy's dedicated industrial operations & maintenance (O&M) rapid response team.
Frequently Asked Questions
Answers to the most common questions regarding Rooftop Solar for Commercial & Industrial.
No. Raysteeds uses specialized aluminium mini-rail and clamp fixtures specifically designed for trapezoidal and standing-seam industrial metal roofs. Every fastener uses industrial-grade EPDM gaskets and UV-resistant sealants, providing a 100% leak-proof installation tested against heavy monsoon rains.
Most commercial and industrial solar installations in North India achieve complete capital payback within 2.5 to 3.5 years. With a 25-year operational lifespan, the system delivers more than two decades of virtually free electricity after payback.
Yes. We install advanced Solar-DG synchronizing controllers that dynamically modulate solar inverter output to match the factory load while maintaining the minimum 30-40% required base load on the DG. This cuts costly diesel consumption by up to 60%.
Yes, commercial solar plants exceeding specific capacity thresholds require approvals from the Chief Electrical Inspector to Government (CEIG) and the state DISCOM. Raysteeds handles the end-to-end liaisoning, drawings, inspection, and safety clearances.

